- 4 inputs, 2 outputs
- 3 position toggle switches (bypass, auto & home function)
- Adjustable dwell knob w/2 - 35 second interval
- BNC input / output connectors
The VTS-W04 switcher is competitively priced Automatic Sequential Switcher designed to meet the needs of the small closed-circuit video system user and which allow two monitors to display the output of up to four cameras in automatic sequence. The scene from each camera is displayed on the monitor for an operator-selected interval of 0.5-30 seconds and may be stopped and a selected scene viewed at the operators discretion. Unused camera positions may be bypassed without changing the order of sequence or the dwell time. The dwell setting and power switch are incorporated into one control. Red LED lamps indicate the camera position being viewed.
Specifications:
- Video Inputs 4 BNC connectors
- Signal Input Level 0.7-2.0 V p-p, 75 Ohm
- Sequential Interval 0.5-30 seconds adjustable
- Switching Time Less than one microseconds
- Video Gain Unity/li>
- Phase Linearity Better than 3 - 10MHz
- Frequency Response 2Hz-45MHz-0.5dB
- Total Bandwith Less than 1Hz to beyond 10MHz (-3dB point)
- Maximum Tilt 1%
- Video Crosstalk Greater than 40dB down at 10MHz (Input to Output)
- Hum and Noise Greater than 55dB down (reference 0dB-1 Vrms) Video switching
- Elements TTL intigrated circuits
- Bandwith Less then 1Hz to beyond 10MHz
- Video Connectors BNC
- Power Switch Rotary control
- Switching 3-position toggle:bypass, auto and home;snap-action
- Dwell Time Switching Rotary controlled, 0.5 to 30 seconds
- Construction Steel with black finish
- Input Voltage 110VAC, 60Hz
- Power Consumption 5 watts
- Dimensions 12.21" x 1.76" x 9.57" (WxHxD)
