Tektone Nurse Call System Parts
Our Tektone Products are backed by a 1 Year Warranty

Because of the number of assisted Care facilities, and the level of detailed requirement in designing the proper system, Fairfax Electronics believes that it is more advantageous to dressing your system needs by phone or in person. Please contact Fairfax electronics by clicking here.

If your need is for replacement parts, please choose your category

Replacement Parts for NC110N-UL Replacement Parts for NC150N-UL, NC200N

Nurse Call Systems (Replacement Parts for NC110N-UL)

PM110/4N

Four lamp module

Four lamp replacement module

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $52.50

Coupon Code:

  QTY:


RP021CM

Custom lens marking

custom lens marking 4 digits maximum

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $1.00

Coupon Code:

  QTY:



PK151A

The PK151A unit provides power and control circuits to
operate TekTone®'s NC150N, NC200N, and NC110N complete Nurse Call Systems. Specifically, the unit contains the electronic circuitry necessary to detect the presence of both normal and emergency calls, and to generate audible and visual control signals. The PK151A also provides steady or intermittent voltages to operate visual signaling devices. The PK151A supports up to 1 amp of current load from field devices. It also supports interconnection of a secondary power supply to increase the output current load to 3 amps (use TekTone®'s PK800A Power Supply). Protective circuitry has been incorporated to protect routine (R) and
emergency call (Q) commons from shorts.

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $208.30

Coupon Code:

  QTY:


PK153

The PK153 Control Unit provides the control circuits to
operate a higher priority call signal, such as a smoke
detector alarm or a code call, for TekTone®'s Tek-CALLT
nurse call systems. When used in conjunction with the
PK151A, the unit provides the additional circuitry for
three levels of calls.
. UL® 1069 Listed
. High-quality integrated circuitry and electronic
components
. Rugged extruded aluminum case
. Provides flashing light and rapid tone for emergency
calls

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $208.30

Coupon Code:

  QTY:



PK124

The PK124 Battery Charger, when used in conjunction with (2) BA001 - 12 VDC batteries, provides for continuous battery charging so that if power to system equipment is interrupted, standby operating power is provided for up to approximately 6 hours. (Time may vary depending on system size and usage.)
TekTone® systems which support the PK124 include the
NC110N, NC150N and NC200N Nurse Call Systems, DS100
Door Sentry Alarm System, and CM800/CM900 Emergency Alarm Systems.

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $126.00

Coupon Code:

  QTY:


SS106

TekTone®'s SS102A and SS106 Class 2 Transformers offer compact, easy-to-install low voltage AC power sources for use with various TekTone® intercom systems. Both transformers are UL® Listed and will safely take themselves off line when overheated. The transformers are constructed for easy installation in a standard 1/2" knockout or for surface installations,
and may be used in plastic or metal boxes.
Primary wire connections are made using the pre-stripped pigtails and ground wire; secondary connections are made using screw terminals.

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $30.00

Coupon Code:

  QTY:



IH151NK

Assembly

Four lamp replacement module

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $323.90

Coupon Code:

  QTY:


BA001

Battery

12VDC. Two (2) required for each Pk124

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $89.50

Coupon Code:

  QTY:



LI381

The LI381 Corridor Light and LI382 Corridor Zone Light provide visual indication of calls when used with a nurse call system, emergency call system, or similar application. Emergency calls are indicated by the rapid flashing of the LI381 Corridor Light associated with the calling station.
Normal calls produce a steady illumination.
The LI382 Corridor Zone Light indicates an emergency call by the rapid flashing of the red covered bulb associated with the zone or area from which an emergency call has been placed. Normal calls are indicated by a steady illumination of the white bulb. If an emergency and normal call are placed
in the same zone at the same time, the red covered bulb connected to the emergency station will flash rapidly, while
the white bulb associated with the normal call will maintain a steady illumination.

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $12.00

Coupon Code:

  QTY:


LI382

The LI381 Corridor Light and LI382 Corridor Zone Light provide visual indication of calls when used with a nurse call system, emergency call system, or similar application. Emergency calls are indicated by the rapid flashing of the LI381 Corridor Light associated with the calling station.
Normal calls produce a steady illumination.
The LI382 Corridor Zone Light indicates an emergency call by the rapid flashing of the red covered bulb associated with the zone or area from which an emergency call has been placed. Normal calls are indicated by a steady illumination of the white bulb. If an emergency and normal call are placed
in the same zone at the same time, the red covered bulb connected to the emergency station will flash rapidly, while
the white bulb associated with the normal call will maintain a steady illumination.

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $19.50

Coupon Code:

  QTY:



LI150B

The LI150B Duty Station provides an indication of incoming calls in work areas away from the Nurse Call Master Control Station. Normal calls are indicated by a steady light and intermittent tone. Emergency calls take precedence and are indicated by a flashing solid-state LED light and a pulsating tone. A "Tone-Off" switch permits silencing of the tone signal for normal calls only.
. Simple, reliable operation
. Call-placed indicator
. Mounted on rugged, ABS plastic panel

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $44.10

Coupon Code:

  QTY:


RP037A

Bulb cover red

Red bulb cover

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $1.10

Coupon Code:

  QTY:



SF100C

The SF100C Room Station includes a jack allowing the
attachment of a call cord (SF301). A call is registered at the
nurse station, corridor light and corridor zone light (if
installed) when the call cord button is used, or if the call
cord is accidentally removed from the jack on the panel.
The station includes a CALL-PLACED indicator which lights
when a call is placed and a CANCEL button mounted on an
attractive, flame retardant ABS plastic faceplate.
. UL® 1069 Listed
. Simple, push button calling
. Call-placed indicator and cancel button
. Call automatically registers if call cord is accidentally
removed
. Corridor zone light capability

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $35.30

Coupon Code:

  QTY:


SF101C

The SF101C Room Station incorporates push button operation of call and cancel functions. A call is registered at the annunciator panel and on a corridor light or
corridor zone light (if installed) when the call switch with integral "CALL-PLACED" LED is pushed. The "CALL-PLACED" LED is also illuminated. Calls are canceled simply by depressing the "CANCEL" button.
The "CALL-PLACED" LED will also be extinguished. All station components shall be mounted on a rugged ABS plastic faceplate.
. UL® 1069 Listed
. Simple, push button calling
. Call-placed indicator
. Cancel push button
. Call activates lamp on annunciator panel and
corridor light
. Flame retardant type ABS plastic faceplate
. Corridor zone light capability

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $50.00

Coupon Code:

  QTY:



SF102

The SF102 Room Station includes two jacks allowing for the attachment of two call cords (SF301). A call is registered at the nurse station, corridor light and corridor zone light (if installed) when either cord button is depressed or if either call cord is accidentally removed from the jack on
the SF102. The station includes a lighted CALL-PLACED switch that lights when a call is placed. The CALL-PLACED switch also provides the system CANCEL function. All of the electronics are mounted on an attractive, flame retardant ABS plastic faceplate.
. UL® 1069 Listed
. Simple, push button calling
. Combined CALL-PLACED indicator and CANCEL button
. Call automatically registers if either call cord is
accidentally removed
. Attractive, flame retardant ABS plastic faceplate
. Corridor zone light capability

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $52.50

Coupon Code:

  QTY:


SF155B

The SF155B Emergency Station is for use in any location where activation of an emergency signal is required. All
electronic components are mounted on a circuit board. The specially designed and mounted LED is completely sealed in plastic. Due to the flexibility of its design, it may be used as a PULL CORD emergency station, or a pull down activated emergency station. The pull cord supplied may be used for emergency call activation, or if desired, the LARGE 1.1" RED pull down lever may be used.
. UL® 1069 Listed
. Simple and flexible operation
. "Call-Placed" indicator
. Call cancel at point of origin
. Attractive, flame retardant type ABS plastic faceplate
. 1.1" wide pull down lever

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $19.00

Coupon Code:

  QTY:



SF156B

The SF156B Code Station is used to operate all system code signals (except supervised code blue applications). It may
be used independently or connected with other call stations or intercom stations.
Placing a code call is accomplished by actuating the slideswitch located at the center of the panel to the down position.
Returning the slide-switch to the up position cancels call.
. UL® 1069 Listed
. Simple, reliable operation
. Call-placed indicator
. Call activates light on annunciator panel, corridor
light, and/or zone light.
. Corridor zone light capability
. Mounted on attractive flame retardant type ABS plastic panel

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $50.00

Coupon Code:

  QTY:


SF301

The TekTone® SF301 (single) or SF302 (double) call cords are for use with the NC110N, NC150N, NC200N, NC205,
NC300T and NC300TII Nurse Call Systems, where 1/4" phono jacks are used.
Ten-foot cords are also available as SF301/10 and SF302/10.
. UL® 1069 Listed
. Dirt and dust protection
. Small, lightweight pendant fits comfortably in hand
. Bed clips included

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $29.00

Coupon Code:

  QTY:



SF301/10

Pushbutton Call Cord

1/4" plug, 10 foot cord

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $37.00

Coupon Code:

  QTY:


SF302

Dual Pushbutton Call Cord

1/4" plug, 7 foot cord

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $55.00

Coupon Code:

  QTY:



SF302/10

Dual Pushbutton Call Cord

1/4" plug, 10 foot cord

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $60.00

Coupon Code:

  QTY:


HW155

Replacement Bed Clip

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $5.00

Coupon Code:

  QTY:



NC366A

Transmitter / Control Unit

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $2,800.00

Coupon Code:

  QTY:


NC375

Transmitter Interface For NC110/NC150/NC200

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $2,000.00

Coupon Code:

  QTY:



LS375

Optional architectural room number programming

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $250.00

Coupon Code:

  QTY:


NC376

POCSAG Receiver with serial port

Please allow 2-3 weeks for delivery

1 Year Warranty

Our Price: $1,800.00

Coupon Code:

  QTY: