Securitron Relays, Timers and Logic Boards
 |
Order Now! |
OVERVIEW
Securitron manufactures an outstanding line-up of accessory
timers and logic boards with the features you need to complete or
enhance
security installations. Circuit boards are supplied with plastic
snap-trak for mounting or are furnished in a plastic enclosure.
The products
offered have all been designed by Securitron in response to real
world problems and they have the features required by our industry.
EXIT DELAY TIMERS
XDT-12 & XDT-24
This microprocessor timer allows full compliance with NFPA 101,
UBC, BOCA, SBC and Canadian building codes for delayed exit. In
general,
delayed exit function is as follows: When an initiate switch in
an
exit bar or push button closes, an optional nuisance delay up to
3 seconds
operates, during which the board signals the alarm. If the initiate
switch is released before the nuisance delay expires, nothing further
happens. If not, the board goes into irrevocable release delay.
The fail
safe lock releases at the end of a 15 or 30 second release delay
period.
It then must be relocked from an external NC switch.
The XDT also has powerful selectable modes which allow it to
meet specific and detailed differences in each code. It also integrates
with access control by providing non-alarmed entry delay, lock status
monitoring and the ability to set door operation into any of four
different
modes from an external switch or time clock. It is available in
separate
12 and 24 VDC versions.
The XDT is also available in a 6" x 6" lockable steel
enclosure
(BA-XDT, 12 or 24), or a flush-mount enclosure with an 8" x
8" stainless
steel plate (FA-XDT). Both are prewired with audible alarm. Actual
board
size: 3 1/4" x 4 1/4"
PRIME TIME MODEL DT-7
The Prime Time digital 7-day
timer is used to turn electric locks
or other security systems on and off
at programmed times. A 10-amp
DPDT relay can be operated in toggle
or pulse mode at selectable
times during the week, with 12 programmed on/off times set daily,
on
selected days, or on blocks of days (Mon - Fri, Mon - Sat or Sat
- Sun).
The exclusive “First Man In” feature delays operation
until an external
switch changes state which automates holiday programming in many
applications.
The Prime Time operates on 12-24 volts AC or DC. An AA cell
provides five year backup to the display module program memory.
Actual size: 7” x 3”.
DOOR
PROP ALARM DPA-12 & DPA-24
The Door Prop Alarm is a multifunctional
control timer that operates
as a sophisticated door prop alarm
with options that permit the flexibility
to meet specific requirements of
end user. The DPA not only monitors
whether the door has been
“propped” open, but when used with
the Senstat feature of the Magnalock
and a door position switch it can detect any attempts to tamper
with
lock status or door status.
The Door Prop Alarm comes equipped with three separate outputs
which can provide local and remote signaling based on a user
selectable time interval. Other features include a bypass mode for
valid
access/egress needs as well as a duress alarm function when used
with a N/O switch.
It is available in separate 12 and 24 VDC versions. Actual board
size: 3-1/4’ x 4-1/4”. Overall size in box: 5-5/8”
x 5-1/2” x 2-7/8”.
