SK-ACP
ADVANCED CONTROL PANEL
Two Door Access Control Unit
 SK-ACP-LE Comes in a 10" x 11" Metal Enclosure |
Technical
Specifications- Supports Two Wiegand Output Card Readers
- 65,000 Card Capacity
- 4,800 Date and Time Stamped Stored Events
- 15 Programmable Time Zones with Weekly Schedule Plus Holidays
- 32 Programmable Holidays
- Over 100 panels can be linked to a PC with SK-NETTM software using a simple RS-485 bus
- Modem Capability for Remote Locations
- TCP/IP Capability for LAN Connection
The SK-ACP Advanced Control Panel is a highly sophisticated, yet simple to use, two door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology, including Proximity, Touch Card, Wiegand, Magnetic Stripe, Bar Code, Optical, and Biometric. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each has a separate node address.
Each of the two doors controlled by the SK-ACP has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user defined input. Each of the two doors controlled by the SK-ACP has two outputs. One output is the Relay that activates the door operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations.
As a stand alone, the unit may be programmed using a PC either locally or via a Modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer.
 |
 |
 |
 |
click on the drawings to enlarge
Over
100 SK-ACP units may be connected together to control over 200 passageways
with SK-NETTM software, using a single twisted pair RS-485 bus.
SK-NETTM software allows integration of the units into a full featured
Window® based, access control system.
